JWPlayer 6.x plugin for WordPress….RTMP and HLS stream short code definition.

Uncategorized
Not sure why this is such a mystery, but it took the better part of the day to troubleshoot. The main issue with forum posts is that people have the right idea/intention, but the forum software mistreats the actual command line/short code. Spacing really really (did I say really) matters. I'm assuming that you're using the default player definition that comes with the plugin. If you need to change it then make the appropriate change to this code as well. The code to get both RTMP and HLS working depends on defining both of those sources. In my case the source is my Wowza Server and I have two URI's: 1) For HLS I use http://wowza.server.ip.address:1935/live/many/playlist.m3u8 2) For RTMP I use rtmp://wowza.server.ip.address:1935/live/many Obviously as you can see my Wowza application is "live"…
Read More

NAB2014 Report

audio, Codec, conversion, DCinema, HDTV, Media, NAB, NERD, Ryerson University, Technology, Video
DEKTEC: DekTec introduced the DTA-2180 low profile PCIe H.264 encoder. The DTA-2180 is a low latency — 150 to 600 ms -- H.264 hardware encoder based on the Magnum chipset. It supports MPEG-2 and H.264 and up to 16 channels of audio. Audio can be encoded as AC-3, AAC or MPEG-1 Layer 2. The DTA-2180 offers a 10 bit 4:2:2 option for contribution encoding.The DTA-2180 has a 3G –SDI and HDMI input and an ASI output. The compressed stream output — TS encapsulated H.264 or mpeg-2 — is also available on the PCIe for real time streaming, processing and recording. NIMBUS: The WiMi6400T and WiMi6400R provides high quality Full HD encoding/decoding function with low latency of 40ms for encoding and decoding, each. It supports wide range of encoding rate from 1Mbps ~…
Read More

Proxmox VPS for web development recipe….

Apple, Linux, proxmox, Ubuntu, Unix, Virtual Hosts
A little while ago our web developer asked me to look into proxmox containers and how we could take advantage of it to setup a development environment for him. The idea was to use the power of linux containers and enable him to develop fully functional/accessible sites in a private container. Here are the steps we will cover in this article: Install proxmox on a machine with a single public IP address Secure the machine with ufw to only allow connections from a specific IP address space Setup a admin user other than root for proxmox admin interface Setup proxmox to use the single IP address and the vmbridge for masquerading Setup two Linux Ubuntu 12.04 containers with private addresses and enable the to access the internet via the bridge…
Read More